Does the dash have to come out to clean the heater matrix?

colin172 · 05-20-2007, 12:10 AM

Just wondering, does the dashboard have to come out to clean the heater matrix?

mrnickleye · 05-21-2007, 05:27 AM

http://www.supras.com/06/techcenter/display.php?QID=59

IHateHacks · 05-21-2007, 02:37 PM

That's to remove the heater core.

To "clean" it you can disconnect the 2 hoses under the hood that connect to the inlet and outlet of the heater core. The one on the passenger side is the inlet (coolant from engine to heater core). The one on the drivers side is the outlet (coolant from heater core to engine). You want to back flush it, which means disconnect both hoses, take a garden hose with an appropriate spray nozzle, and spray it into the drivers side heater core nipple. Be sure to attach something on the passenger side heater core nipple to catch or aim the coolant that gets sprayed out as you don't want it all over the electronics.

05-20-2007, 12:10 AM	#1
colin172 Stock Join Date: May 2006 Location: Ireland Posts: 20	Does the dash have to come out to clean the heater matrix? Just wondering, does the dashboard have to come out to clean the heater matrix?

05-21-2007, 05:27 AM	#2
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	this help?? http://www.supras.com/06/techcenter/display.php?QID=59 __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heater hose locations	suprabahamut	MKIII Supra	4	12-16-2008 10:07 PM
another heater problem	nicnet	MKIII Supra	16	12-05-2007 10:18 PM
heater problem..... cold like heck...	hangsupra	MKIII Supra	9	01-28-2007 05:35 PM
Heater By-Passing...Your Thoughts	mrnickleye	Non-Generation Specific Questions	2	05-03-2006 03:06 PM

05-21-2007, 02:37 PM	#3
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	That's to remove the heater core. To "clean" it you can disconnect the 2 hoses under the hood that connect to the inlet and outlet of the heater core. The one on the passenger side is the inlet (coolant from engine to heater core). The one on the drivers side is the outlet (coolant from heater core to engine). You want to back flush it, which means disconnect both hoses, take a garden hose with an appropriate spray nozzle, and spray it into the drivers side heater core nipple. Be sure to attach something on the passenger side heater core nipple to catch or aim the coolant that gets sprayed out as you don't want it all over the electronics.