06-14-2007, 04:37 AM | #1 |
3" Exhaust
Join Date: Mar 2007
Location: Wisconsin
Posts: 214
|
Foglight question
I have a 1986.5 supra and every time i go to the auto parts store they try to sell me the bulb for the fog light but i'm 90% sure that i need the entire unit not just the bulb. Can anyone tell me what I need?
|
06-14-2007, 04:48 AM | #2 |
Super Moderator
Join Date: May 2007
Location: Billings, Montana
Posts: 1,034
|
If you have the foglight itself, then don't replace it. You can buy the bulbs seperately. I think they are H3 bulbs.... Don't quote me on that though. I removed the entire foglight housing to determine why mine weren't working, and after I took them apart I found out that the bulb in each one was bad. Disconnected it, went to AutoZone, got two new ones, put it back together and on my car, and *Voila* no problems.
__________________
1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels |
06-14-2007, 07:13 AM | #3 |
Stock
Join Date: May 2007
Location: Los Angeles
Posts: 11
|
The bulbs should be H3 with 55watts, I just changed a fog light that went bad last week so yeah. Its really easy to do, just unscrew the fog light unit, take the old bulb out and replace it with the new one.
|
06-17-2007, 05:32 AM | #4 |
12psi boost
Join Date: Jan 2007
Location: long beach, CA
Posts: 252
|
dont mean to jack the thread. but my fog light went out too after i put in my HID head lights and i bought new bulbs change fuse and i still cant get the foglights to work n e one know why
__________________
88turbo targa-white original Pin Stripe custom intake-Tenzo filter.....Momo racing seats and steering wheel... apexi exhaust tip-custom 3" piping. Replaced with RSR GT II NGK plug and wires HID conversion head lights HKS Turbo Timer Type-1 (in black) Tial BOV BIC DDP |
06-17-2007, 06:16 AM | #5 | |
3" Exhaust
Join Date: May 2007
Location: Long Beach, CA
Posts: 224
|
Quote:
|
|
06-17-2007, 06:28 AM | #6 |
12psi boost
Join Date: Jan 2007
Location: long beach, CA
Posts: 252
|
havent check that yet i wouldnt know how to though
__________________
88turbo targa-white original Pin Stripe custom intake-Tenzo filter.....Momo racing seats and steering wheel... apexi exhaust tip-custom 3" piping. Replaced with RSR GT II NGK plug and wires HID conversion head lights HKS Turbo Timer Type-1 (in black) Tial BOV BIC DDP |
06-17-2007, 07:23 AM | #7 |
3" Exhaust
Join Date: May 2007
Location: Long Beach, CA
Posts: 224
|
when you turn your fog lights on and off do you hear a clicking noise? and the relay i think should be on the junction box near the fog light fuse it will be easier to see when you take off the interior trim covering, but im not sure though cause yours is a 88 and mine is 89, the relay might not even be the problem, could be a bad ground or loose connections. by the way yellow fog lights look pretty sexy on the mk3.
|
06-17-2007, 06:06 PM | #8 |
12psi boost
Join Date: Jan 2007
Location: long beach, CA
Posts: 252
|
yeah i hear clicks when i switch it im thinking its a ground wire too but then again it only happend after i put in the HID lights ill check it all on monday
__________________
88turbo targa-white original Pin Stripe custom intake-Tenzo filter.....Momo racing seats and steering wheel... apexi exhaust tip-custom 3" piping. Replaced with RSR GT II NGK plug and wires HID conversion head lights HKS Turbo Timer Type-1 (in black) Tial BOV BIC DDP Last edited by 88Tsupra; 06-17-2007 at 06:09 PM. |
06-17-2007, 08:43 PM | #9 |
3" Exhaust
Join Date: May 2007
Location: Long Beach, CA
Posts: 224
|
if you think that the HID is the problem try putting back the stock headlights and see if it works
|
06-18-2007, 03:16 AM | #10 |
12psi boost
Join Date: Jan 2007
Location: long beach, CA
Posts: 252
|
done that still didnt work took both off so now i just think its ground
__________________
88turbo targa-white original Pin Stripe custom intake-Tenzo filter.....Momo racing seats and steering wheel... apexi exhaust tip-custom 3" piping. Replaced with RSR GT II NGK plug and wires HID conversion head lights HKS Turbo Timer Type-1 (in black) Tial BOV BIC DDP |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about 7m-gte. | AzNbOi2626 | MKIII Supra | 3 | 03-29-2011 06:55 PM |
Starter Removal question | OkieRA29 | MKIII Supra | 13 | 05-11-2010 12:08 AM |
Pre89 versus 89+ nose and support. | lifesnotfair | MKIII Supra | 2 | 01-08-2010 09:06 PM |
turbo or not ??? That's the question ... | sausa | MKIV Supra | 7 | 03-30-2007 02:22 AM |
Help! Question on front NOSE and bumper supports. | lifesnotfair | MKIII Supra | 1 | 12-26-2005 03:54 PM |