Head Gasket

Supra86 · 06-26-2007, 09:40 PM

Is there any way to fix the haed gasket problem on the 7mge motor so it does not happen again

motosparky · 06-26-2007, 10:02 PM

INSTALL A 1JZ

Sorry, but I have done one on all my 7MGE's and Turbos.
It is that damn # 6 cylinder/water jacket wall being to thin.

IHateHacks · 06-27-2007, 01:03 AM

Proper prep work done to the head and block, ARP hardware (bolts or studs), a digital torque wrench, and following the tighening sequence that's in the TSRM will keep it from blowing again. I did mine in 5 passes, the TSRM recommends 3.

SupraDupra · 06-27-2007, 02:31 AM

Quote:

Originally Posted by IHateHacks

Proper prep work done to the head and block, ARP hardware (bolts or studs), a digital torque wrench, and following the tighening sequence that's in the TSRM will keep it from blowing again. I did mine in 5 passes, the TSRM recommends 3.

Agree. The only reason the head gaskgets fail is because the factory had improper torque specs. Do it right ,do it once

supramacist · 06-27-2007, 05:13 AM

I did mine in 5 passes as well.

Kobalt torque wrench. Took them to 85flbs.

Yes you can do the hg thing and do it so it doesn't do it again. I honestly doon't think their is any real gaurantee.

tone loc · 06-27-2007, 07:32 AM

i hear its because of unproper torque from the factory.

06-26-2007, 09:40 PM	#1
Supra86 Stock Join Date: Jun 2007 Location: Edmonton Posts: 1	Head Gasket Is there any way to fix the haed gasket problem on the 7mge motor so it does not happen again

06-26-2007, 10:02 PM	#2
motosparky Stock Join Date: Nov 2006 Location: AV California Posts: 22	INSTALL A 1JZ Sorry, but I have done one on all my 7MGE's and Turbos. It is that damn # 6 cylinder/water jacket wall being to thin. __________________ 89 N/A Supra Previous: 90 Turbo 86.5 N/A 85 GT http://s81.photobucket.com/albums/j2...%20For%20Sale/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown Head Gasket Snake Oil	unkymurch	Non-Generation Specific Questions	21	08-06-2010 02:11 AM
1989 Supra blown head gasket	rayk5799	Non-Generation Specific Questions	6	05-18-2009 10:51 AM
Head Gasket replacement questions.	DavidLeClair584	MKIII Supra	1	06-09-2007 09:17 PM
Buying a 87, head gasket questions	Gengus	MKIII Supra	1	04-14-2007 07:15 PM
Head Gasket Part II	Bullz_EyE	MKIII Supra	2	01-26-2006 06:30 PM

06-27-2007, 01:03 AM	#3
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	Proper prep work done to the head and block, ARP hardware (bolts or studs), a digital torque wrench, and following the tighening sequence that's in the TSRM will keep it from blowing again. I did mine in 5 passes, the TSRM recommends 3.

06-27-2007, 05:13 AM	#5
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	I did mine in 5 passes as well. Kobalt torque wrench. Took them to 85flbs. Yes you can do the hg thing and do it so it doesn't do it again. I honestly doon't think their is any real gaurantee.

06-27-2007, 07:32 AM	#6
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	i hear its because of unproper torque from the factory.