![]() |
7mge swap, electrical problem
Hi, as some of you may know i did a swap from a non-turbo auto, to a JDM 7mgte 5 spd. I have one big problem, as the japanese wire harness is made for a right hand drive, it wont work. Also the connectors are a bit different, any suggestions. Greatly appreciated Thank you.
-Mike- |
I ran into the same problem with my 1JZGTE swap the different connectors are a easy fix just have to find them and splice them into your wireing harness. If you go to a dealership and take the connectors they should be able to get them. I lucked out because I had a clip and just cut off the ones I needed. As for wiring them there is quite a few people out there that have a wiring diagram that will work for you the colors should be the same just in different places on the plugs.
|
or you can find a new harness for the oem supras and pay like $500
|
Quote:
|
bump for my question
|
Here's an online copy. I recommend buying a copy though, it's alot easy to thumb through a printed version and as long as sales continue Toyota's more likely to keep publishing them.
I suspect it would be easier to convert your original harness. http://www.cygnusx1.net/Supra/Librar...x?S=Main&P=002 |
All times are GMT. The time now is 08:26 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.