08-20-2007, 10:12 PM
|
#1 |
|
12psi boost
Join Date: Mar 2007
Location: Sacramento, Ca
Posts: 373
 |
Coolant Hoses?
hey all i had another bad experience with cracked hose this weekend and all my water left my vehicle, so i cut the hose shorter once i found it, and re-tightened the clamp and made a fix... but now i would like to replace all the hoses so this doesnt happen to me again. the one that broke on me this weekend went from head to what it seems is the firewall, i think, i'd have to go look again, anyways i was wondering if that hose had a certain name, also where to get coolant hose kit. Wouldnt mind them looking like the new guys lexus steel mesh kit either, thanks
 for any info
|
|
|
|
08-22-2007, 08:16 PM
|
#2 |
|
12psi boost
Join Date: Mar 2007
Location: Sacramento, Ca
Posts: 373
|
alright guys i found some sleeves to cover hoses, and found steel braided fuel lines, but not finding any steel braided radiator hoses or heater hoses etc. Looking to upgrade the cooling system cause dont like when my hoses go out on me while im driving
so any help is appreciated, thanks. Also will get pic on here of hose that broke on me this weekend, thanks in advance.
|
|
|
|
|
08-22-2007, 08:42 PM
|
#3 |
|
12psi boost
Join Date: Mar 2007
Location: Sacramento, Ca
Posts: 373
|
 the dark black one going across the middle of pic heading down after the left valve cover is the one that broke on me, does it have a name?
|
|
|
|
|
08-22-2007, 08:46 PM
|
#4 |
|
12psi boost
Join Date: May 2006
Location: Athens, TX
Posts: 308
|
I think it is called the heater core feed hose because that is what it does you could always just buy some 1/2 inch hose and make a new one. Just be kind of giving on the corner and it should be fine.
__________________
1987 supra NA 5 speed 1JZGTE swap Tokico Illumina 2 and Eibach springs Tokico pillow blocks Suspension Techniques front and rear sway bar HKS super dragger cat-back exhaust plus test pipe Greddy Profec B spec 2 boost controller HKS type 1 turbo timer Supra sport solid steel drive shaft Walboro 255 fuel pump JZA70 Front end mod 18" Volk Racing AV3 18x8.5 front 18x9.5 rear |
|
|
|
|
08-22-2007, 09:10 PM
|
#5 |
|
AEM EMS
Join Date: Jul 2006
Location: UK
Posts: 891
|
Heater Water Outlet Hose Toyota part # 87245-24190 for a UK RHD
I would guess it would be the same for a US LHD |
|
|
|
|
08-22-2007, 11:28 PM
|
#6 |
|
12psi boost
Join Date: Mar 2007
Location: Sacramento, Ca
Posts: 373
|
thanks for the responses guys, i had thought about just getting same size hose but it had some drastic curves so thought it might have specific part i can replace with, so thanks for the info on the part number, will be replacing soon.
|
|
|
|
|
08-23-2007, 12:35 AM
|
#7 |
|
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
|
ummm goto www.summitracing.com
that is were i got my steel braided kit for like 25$ they also sell the metal bends like 45o and 90o bends so that way you wont kink the hose if you goto your auto shop and just buy new hose. plus it looks pretty 
__________________
 7MGTE - 500hp  never dyno'dexhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR |
|
|
|
|
08-23-2007, 12:37 AM
|
#8 |
|
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
|
__________________
7MGTE - 500hp never dyno'dexhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR Last edited by west_side_supra; 08-23-2007 at 12:39 AM. |
|
|
|
|
08-23-2007, 07:20 PM
|
#9 | |
|
12psi boost
Join Date: Mar 2007
Location: Sacramento, Ca
Posts: 373
|
Quote:
|
|
|
|
|
|
08-24-2007, 02:10 AM
|
#10 |
|
1000whp postwhore
Join Date: Jun 2005
Location: Mojave Desert, Calif.
Posts: 1,705
|
I just used a piece of straight GATES hose (top quality)from parts store and 'bowed' it over. No kinks, plenty of clearance, and looks OK.
You could get straight hose and come up off engine to a 90* elbow, then hose over to the heater fitting.
__________________
Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08. |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| MK3 supra Hose Techniques silicon hoses | Micahwc | Shops & Part Reviews | 8 | 12-09-2012 09:03 PM |
| Heater Union (Coolant Leak) | slader99 | MKIII Supra | 11 | 12-28-2009 12:29 AM |
| Can anybody show me help me with coolant hoses | jesse_c91 | Non-Generation Specific Questions | 0 | 06-10-2008 03:19 AM |
| coolant everywhere | TITAN DOHC V8 | MKIII Supra | 0 | 09-09-2007 05:45 AM |
| Coolant leak issues | D_Train | MKIII Supra | 1 | 03-15-2007 04:30 AM |
Linear Mode
