![]() |
#1 |
Stock
Join Date: Apr 2007
Location: Gettobama
Posts: 3
![]() |
![]()
I did a rebuild because I thought I had a bhg....while the head was off it was machined and milled at a engine shop. Put the thing back together, timing was done by a mechanic, and I have cleared out all the errors.
The problem is that when it starts it dies right away unless I give it gas. Then it won't stay started unless I keep it above 2k rpms. Is there anyway I could have put something back together wrong to make this anomaly not stay idle but still run at higher rpm? I have changed the fuel filter. There is fuel pressure because I cracked open a bolt to see if it was torqued right, and it was. I checked the vacuum hoses and they are all routed correctly. I have tried kicking the tires. I have tried talking nice to it. But nothing seems to be helping.....Anyone have any suggestions before I take it to the dealer and give them a bag of money? If anyone guesses the problem correctly I will buy them a steak dinner, no joke. It's an 89 NA supra exterior white with blue interior if that helps. |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DOes this sound like a good Deal plz give advice | Jbone7 | Non-Generation Specific Questions | 0 | 03-06-2008 03:21 AM |
What turbo would give me the most power at 6-8psi | supraman121 | MKIII Supra | 9 | 09-11-2007 12:45 AM |
head gasket gone would it give oil in turbo intake | johnkarl | MKIII Supra | 7 | 10-31-2006 06:38 PM |
Can some of you guys give me some info on these cars? | Big Jimbo | MKIII Supra | 5 | 01-07-2006 08:24 PM |
give me money .. NOWWW | TRAFIK | Non-Generation Specific Questions | 0 | 11-06-2005 06:12 AM |