7mge w/ tubro

carfanatic89 · 09-24-2007, 12:27 AM

one of the problems of puting a tubro on a 7 mge is the return of oil to the oil pan, my question is there is a plug on the side of the pan (not the drain plug)couldnt you unscrew the plug and adapt it to recieve the oil after the turbo. i think its on the other side but you could bend a hard line to that side and screw it in????

supraman121 · 09-24-2007, 03:53 AM

Why not just buy one of these thingys and have it return into there?
Well if it isnt pressurised, it might be but if it isnt have someone drill a hole weld a plug and then you can go nuts

http://www.optionimports.com/oilfiblad.html

Supra2NR · 09-24-2007, 09:38 PM

Even if you get to use the hole on the otherside, how do plan to route the pipes?
Underneath the oil pan?

I'm not sure how much pressure there is in the return
But a slacked line causes oil to build up in the turbo, and causes it smoke and may lead to messing up the seals,
And that's only a slack on the line,

Jus tap the oil pan on the exhaust side of the engine, get sum fitting welded in
So that way ur sure its gonna work,
Rather than spending all that time routing lines to the other side, jus so u can blow ur turbo

carfanatic89 · 09-27-2007, 02:46 AM

Im not adding a tubro to my 7mge, I was just throwing the idea out there to see what yall thought.

09-24-2007, 12:27 AM	#1
carfanatic89 3" Exhaust Join Date: Apr 2007 Location: Waco Posts: 164	7mge w/ tubro one of the problems of puting a tubro on a 7 mge is the return of oil to the oil pan, my question is there is a plug on the side of the pan (not the drain plug)couldnt you unscrew the plug and adapt it to recieve the oil after the turbo. i think its on the other side but you could bend a hard line to that side and screw it in???? __________________ Supra Engine Powered Dragster

09-24-2007, 03:53 AM	#2
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	Why not just buy one of these thingys and have it return into there? Well if it isnt pressurised, it might be but if it isnt have someone drill a hole weld a plug and then you can go nuts http://www.optionimports.com/oilfiblad.html __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

09-24-2007, 09:38 PM	#3
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	Even if you get to use the hole on the otherside, how do plan to route the pipes? Underneath the oil pan? I'm not sure how much pressure there is in the return But a slacked line causes oil to build up in the turbo, and causes it smoke and may lead to messing up the seals, And that's only a slack on the line, Jus tap the oil pan on the exhaust side of the engine, get sum fitting welded in So that way ur sure its gonna work, Rather than spending all that time routing lines to the other side, jus so u can blow ur turbo __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

09-27-2007, 02:46 AM	#4
carfanatic89 3" Exhaust Join Date: Apr 2007 Location: Waco Posts: 164	Im not adding a tubro to my 7mge, I was just throwing the idea out there to see what yall thought. __________________ Supra Engine Powered Dragster

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7MGTE to 7MGE	karu	MKIII Supra	4	10-22-2010 07:22 AM
7mge to 7mgte	kallmijonx2	MKIII Supra	2	10-22-2006 12:55 PM
7mgte AFM on a 7mge	boogum7	MKIII Supra	1	04-07-2006 02:12 AM
New 7mge on the way	Levi1717	MKIII Supra	8	03-10-2006 05:59 PM
7mge vs. 7mgte	KNYFE	MKIII Supra	3	09-27-2005 02:21 PM