5spd to a 6spd

supraman121 · 10-12-2007, 12:12 AM

Would the 2jz 6spd trans work with the 7m if i were to use the 7m bellhousing?

kwnate · 10-12-2007, 02:57 AM

Do you know the mk 4 6 speeds go for $3,000 and up?

supraman121 · 10-12-2007, 03:55 AM

Would it work?

86_sports_1jz · 10-12-2007, 04:27 PM

Quote:

Originally Posted by supraman121

Would the 2jz 6spd trans work with the 7m if i were to use the 7m bellhousing?

no it won't, different bell housings and tranny won't fit in as a direct drop. much fabbing is needed

Chambers · 10-13-2007, 11:55 PM

Well it will fit without modding the tranny tunnel, its the shifter linkage that has to be modified, other than that only tranny mounts are needed, but the bell housing on the Getrag is one with the tranny, so it cant be adapted to a 7M bell housing.

10-12-2007, 12:12 AM	#1
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	5spd to a 6spd Would the 2jz 6spd trans work with the 7m if i were to use the 7m bellhousing? __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

10-12-2007, 02:57 AM	#2
kwnate SP58GT Join Date: Jul 2005 Location: USA Posts: 633	Do you know the mk 4 6 speeds go for $3,000 and up? __________________ Nate

10-12-2007, 03:55 AM	#3
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	Would it work? __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

10-13-2007, 11:55 PM	#5
Chambers walbro fp Join Date: May 2007 Location: USA - Harford County, Maryland Posts: 481	Well it will fit without modding the tranny tunnel, its the shifter linkage that has to be modified, other than that only tranny mounts are needed, but the bell housing on the Getrag is one with the tranny, so it cant be adapted to a 7M bell housing. __________________ Whats in the garage, well.... in the yard. 1986.5 Toyota Supra - NA - 5 spd 1986 Ford Ranger Lowrider - 5 spd 1984 Ford Ranger XLT - 7" Lift - 4X4 - Auto "Stuck in the 80's" Last edited by Chambers; 10-13-2007 at 11:58 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who much is worth a 2JZ-GTE + Getrag 6spd	JayMark	Non-Generation Specific Questions	3	03-06-2008 02:26 AM
5spd conversion	tokis	MKIII Supra	3	11-25-2007 03:26 AM