06-01-2009, 10:21 PM
|
#1 |
|
Stock
Join Date: Jun 2009
Location: Chile
Posts: 2
 |
1.5jz question.
First of all hello.
I got a toyota soarer 1jzgte, and i bought a 2jzge very cheap, and my question is can i put the 2jzge crankshaft, rods and 1jzgte pistons in my 1jzgte block, so i dont loose the squirters???. Does anyone knows any link with that?. Thanks alot. Javier. |
|
|
|
06-02-2009, 12:35 AM
|
#2 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
2) I don't think you can do what you describe - from what I understand, the 1jz-gte is the same bore with a shorter stroke (which is why it's only 2.5L). To me, you should consider doing it the other way...take your 2jz-ge block to a machinist and ask him to drill holes & tap boltholes for the 1jz-gte oil squirters.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Question about 7m-gte. | AzNbOi2626 | MKIII Supra | 3 | 03-29-2011 06:55 PM |
| Pre89 versus 89+ nose and support. | lifesnotfair | MKIII Supra | 2 | 01-08-2010 09:06 PM |
| 1.5jz question | Javier Wilde | MKIII Supra | 0 | 06-02-2009 02:44 AM |
| Help! Question on front NOSE and bumper supports. | lifesnotfair | MKIII Supra | 1 | 12-26-2005 03:54 PM |
| Quick question | AutoXMan | MKIII Supra | 12 | 09-30-2005 06:40 AM |
Linear Mode
