2jzge BUILD....NEED HELP

Thebighouse111 · 09-16-2009, 11:53 PM

Hi all this is my first post. I am planning on buying a used 2jzge, or if I can find one, a 2jzgte engine or block and building it up from bottom up. I want to eventually turbo the engine when I get to that point and was wondering if one block or the other was better. I was wondering if there was a place where I could find the clearances between the piston and the cylinder wall and stuff like that. Also I've read on other forums that the 2jzge has different compression and oil squirters than the gte. Does that make a huge difference if im building from bottom up? Any help would be appriciated. Dont be too hard if I made any mistakes or if Im asking questions that have been answered over and over.

Thanks

09-16-2009, 11:53 PM	#1
Thebighouse111 Stock Join Date: Sep 2009 Location: New Jersey Posts: 1	2jzge BUILD....NEED HELP Hi all this is my first post. I am planning on buying a used 2jzge, or if I can find one, a 2jzgte engine or block and building it up from bottom up. I want to eventually turbo the engine when I get to that point and was wondering if one block or the other was better. I was wondering if there was a place where I could find the clearances between the piston and the cylinder wall and stuff like that. Also I've read on other forums that the 2jzge has different compression and oil squirters than the gte. Does that make a huge difference if im building from bottom up? Any help would be appriciated. Dont be too hard if I made any mistakes or if Im asking questions that have been answered over and over. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cannot build up boost :(	azerty	MKIII Supra	4	04-22-2009 03:56 AM
3.4 bored out stroked supra build	Fredy171787	MKIII Supra	2	04-12-2008 03:10 PM
Mad Carbon Build Up	supraman121	MKIII Supra	2	04-24-2007 04:22 PM
2jzgte 2jzge	zbower	Non-Generation Specific Questions	1	06-19-2006 10:14 PM
Difference between 2jzge and 2jzgtte buttom ends	Dboz	MKIV Supra	7	01-08-2006 04:20 AM