11-03-2011, 08:25 PM
|
#1 |
|
Stock
Join Date: Nov 2011
Location: Colorado Springs
Posts: 5
 |
Expansion tank hose routing, and hood release cable routing
I'm reassembling my wife's '97 Supra, and I wanted to confirm the routing of the hose from the expansion tank to the radiator, as well as the routing
of the hood release cable. Does anyone have a photo of either or both of these? |
|
|
|
11-04-2011, 10:38 AM
|
#2 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
 ).
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
11-04-2011, 12:54 PM
|
#3 | |
|
Stock
Join Date: Nov 2011
Location: Colorado Springs
Posts: 5
|
By TSRM, are you referring to the Toyota shop manual for the Supra,
or something else? Quote:
|
|
|
|
|
|
11-04-2011, 01:10 PM
|
#4 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
11-04-2011, 01:55 PM
|
#5 | |
|
Stock
Join Date: Nov 2011
Location: Colorado Springs
Posts: 5
|
I have this manual. I didn't see the routing for either the expansion tank hose or the cable. What page(s) did you see this on?
Quote:
|
|
|
|
|
|
11-06-2011, 10:07 PM
|
#6 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
11-07-2011, 12:52 PM
|
#7 | |
|
Stock
Join Date: Nov 2011
Location: Colorado Springs
Posts: 5
|
This is for a '97. So What page or section did you find the routing?
Quote:
|
|
|
|
|
|
11-15-2011, 02:09 AM
|
#8 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
For the hood release cable, I couldn't find that routing in either one of my TSRMs (engine or chassis). I suspect you'd find it in the autobody repair TSRM for your model year.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. Last edited by pwpanas; 11-15-2011 at 02:12 AM. |
|
|
|
|
|
11-16-2011, 04:25 PM
|
#9 | |
|
Stock
Join Date: Nov 2011
Location: Colorado Springs
Posts: 5
|
Quote:
the entire cooling section of the EG chapter, and found no actual routing for this hose. There were only some line drawings showing where the hose attaches to the radiator (obvious). The PDF for autobody repair was missing some details. the hood release routing appeared to be one of them. This one is probably more obvious how to route, however. |
|
|
|
|
|
11-17-2011, 02:48 AM
|
#10 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
 |
|
|
Linear Mode
