Need help with mk4 Chase Bays harness
 

I just received my new Chase Bays harness for my 96 mk4. It has the mil spec and Haltech connectors. Looking at the oem harness there are several plugs inside the cabin that are not on the new harness. Do I have to split the old harness and use these plugs? There are also 2 plugs on the new harness that go into the cabin that I have no idea where they go. I thought this would be a straight forward install. Wrong! Anybody who has installed this harness your help would be greatly appreciated. Thanks.

Doesn't Chase Bays provide instructions?

They provide nothing I emailed them 2 days ago and have yet to receive a answer. I have since figured out all my own answers. The injector plugs were done in pairs but 3 and 4 ,5 and 6 were the exact same length so I had to go to pinout from stock ecu and use my haltech patch loom and ohm meter to figure them out. The 2 connectors inside the cabin that had me stumped are the ignitor connectors which I had to relocate to inside. No big deal but a few tips would have been nice. They told be 6 weeks delivery time and it ended up being 10. Needless to say I wont be dealing with them again. You cant even call, you can email them and request a call back "Don't call us we will call you"

They got back to me today and answered all my questions. They are currently working on a installation video, personally I think it would be much easier to put a few tips on a piece of paper photocopy and send it with the harness imo.

Glad to hear it! If there's any way you could post up the video or instructions, that would be awesome.

Good luck with the modifications!