|
![]() |
#1 | |
Stock
Join Date: Apr 2006
Location: Florida
Posts: 2
![]() |
![]() Quote:
The block in the IS300, as with the old SC300 and old GS300, is the 2JZGE. It is the same block, but not the same engine. Meaning, the IS motor wasn't built from the factory to handle boost, there are a lot of turbo components on the 2JZGTE that are absent from the 2JZGE. That being said, turbo components from the Supra will not bolt directly on the IS300. The ECU has to be controlled/tuned/even bypassed in an IS300 to make it into a turbo car. Here are a few of the manufacturers of quality IS300 turbo kits listed in order that I would purchase from: 1.) Toyomoto, Inc. - Miami, FL - http://www.toyomoto.com/ I rode in a 550 whp turbo IS300 from Toyomoto, and that thing was scary fast! 2.) Peter Farrell Supercars - Maryland - http://www.pfsupercars.com/ 3.) Powerhouse Racing - Texas ?? - http://www.powerhouseracing.com/files/index.php 4.) Swift Racing Technologies - Maryland - http://www.swiftracing.com/
__________________
R.I.P. Evo VIII Hello MKIV Last edited by jdub24; 04-25-2006 at 02:07 PM. |
|
![]() |
![]() |
![]() |
#2 |
3" Exhaust
Join Date: Jul 2005
Location: Roswell, NM
Posts: 73
![]() |
![]()
Powerhouse Racing is in New Mexico.
__________________
1987 N/A MA70 Supra <--1JZ swap in progress 1986 AE86 GT-S Hatchback 2002 DC5 RSX Type S |
![]() |
![]() |
![]() |
#3 | |
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
![]() |
![]() Quote:
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
![]() |
![]() |
![]() |
#4 | |
3" Exhaust
Join Date: Jan 2006
Location: San Diego Cali
Posts: 129
![]() |
![]()
well this is a good post too.. your talking about the diference in the 2JZ-GE aqnd 2JZ-GTE .... the block is the same in the N/A Supra as the IS300.. but the tune and comp are different..it does not perform in the same way..
Quote:
|
|
![]() |
![]() |
![]() |
#5 |
500whp yet?
Join Date: Nov 2005
Location: Long branch, NJ
Posts: 1,006
![]() |
![]()
Well my original plan was to not spend a lot, because i cant afford a mk4 supra, But i guess ill keep saving
![]()
__________________
Yay the supra assistant is gone!!! WEEE!! |
![]() |
![]() |
![]() |
#6 | |
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
![]() |
![]() Quote:
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Supra R154 5 Speed Transmission In An Is300 | MKIII Supra | 1 | 12-19-2005 08:51 AM |