Newbe MKIII questions

mackatack · 06-09-2005, 08:20 PM

Hello To All

Ok lets start here I just bought a White 86.5 Supra NA 5spd 86000mi. clean $500 buckaroos.
The motor is out of the car "no big deal" .
The owner said the timing belt jumped time.
OK HERE IS THE BIG QUESTION
Is the motor the noninterference design, or interference.
Other word will the valves be bent if the trimming belt jumps time.
I'm not worming about the head just the bottom end.
Thanks
Rich, or iterferance

KingDiamond · 06-09-2005, 10:31 PM

you are fine these motors are non interference

mackatack · 06-10-2005, 11:35 AM

Thanks KingDiamond

Rich

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CLOSED WTB - USA-Usable RHD MkIII	GTRacer	Buy/Sell Cars	5	12-02-2009 02:21 AM
questions before I begin my swap	2dogs	MKII Supra	1	09-18-2008 05:49 AM
Questions on buying a 88 MKIII Targa Turbo	Jornez	MKIII Supra	5	06-23-2008 05:33 PM
Questions on MKiii	mrnickleye	MKIII Supra	2	06-10-2005 07:08 PM

06-09-2005, 08:20 PM	#1
mackatack Stock Join Date: Jun 2005 Posts: 2	Hello To All Ok lets start here I just bought a White 86.5 Supra NA 5spd 86000mi. clean $500 buckaroos. The motor is out of the car "no big deal" . The owner said the timing belt jumped time. OK HERE IS THE BIG QUESTION Is the motor the noninterference design, or interference. Other word will the valves be bent if the trimming belt jumps time. I'm not worming about the head just the bottom end. Thanks Rich, or iterferance

06-09-2005, 10:31 PM	#2
KingDiamond 12psi boost Join Date: Apr 2005 Location: West Milford, NJ Posts: 357	you are fine these motors are non interference

06-10-2005, 11:35 AM	#3
mackatack Stock Join Date: Jun 2005 Posts: 2	Thanks KingDiamond Rich