I need Vaccume Diagram Help

SleepysSupra · 01-08-2008, 12:01 AM

I recently got my Supra back after it was stolen two weeks ago and the person that took it started to dissasemble the car to part it out. I didn't have full coverage so I had to put it back together myself. But I am having trouble with the vaccume routing. I f anyone has any pictures of where the lines go on their own supra I would really appreciate if you could help me out. I drive a 88 Supra Turbo 7MGTE. Thanks again guys and gals for any help you can give.

Bill UK · 01-09-2008, 08:29 PM

Try this link HERE

SleepysSupra · 01-09-2008, 10:01 PM

Great my car is now alive and running again. Thanks Bill for the very detailed diagrams I could not have done it without you. I still have one problem though. I can't find where the boost gauge is supposed to hook up I have an extra vaccume line and if I blow in in the boost meter moves up. Any suggestions?

Bill UK · 01-10-2008, 08:38 PM

A couple of places worth checking are the connection at the rear of the inlet manifold (the end nearest the bulkhead and the connection to the pressure sensor unit (adjacent to the top of the shock absorber US drivers side) Apologies for pic`s, I had to use a flash light.

SleepysSupra · 01-11-2008, 12:16 AM

Does it connect to the lines that the cruise hooks up to?

SleepysSupra · 01-11-2008, 12:17 AM

Thanks for the pictures they are a big help

Bill UK · 01-11-2008, 03:42 PM

Quote:

Originally Posted by SleepysSupra

Does it connect to the lines that the cruise hooks up to?

Yes, thats the one

01-08-2008, 12:01 AM	#1
SleepysSupra Stock Join Date: Dec 2007 Location: Meriden, Connecticut, USA Posts: 16	I need Vaccume Diagram Help I recently got my Supra back after it was stolen two weeks ago and the person that took it started to dissasemble the car to part it out. I didn't have full coverage so I had to put it back together myself. But I am having trouble with the vaccume routing. I f anyone has any pictures of where the lines go on their own supra I would really appreciate if you could help me out. I drive a 88 Supra Turbo 7MGTE. Thanks again guys and gals for any help you can give.

01-09-2008, 10:01 PM	#3
SleepysSupra Stock Join Date: Dec 2007 Location: Meriden, Connecticut, USA Posts: 16	Thanks for the help Great my car is now alive and running again. Thanks Bill for the very detailed diagrams I could not have done it without you. I still have one problem though. I can't find where the boost gauge is supposed to hook up I have an extra vaccume line and if I blow in in the boost meter moves up. Any suggestions?

01-11-2008, 12:16 AM	#5
SleepysSupra Stock Join Date: Dec 2007 Location: Meriden, Connecticut, USA Posts: 16	Crusie Control Does it connect to the lines that the cruise hooks up to?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1987 Supra wire diagram	scrid	MKIII Supra	4	04-24-2011 05:42 PM
Wiring diagram?	dannydavi	MKIII Supra	3	04-07-2009 04:18 AM
Diagram or photos how to get interior panel off?	stanley2001	Exterior , Interior, and Detailing	1	08-20-2007 03:44 PM
HLP - 87 fog light diagram	kaves_420	Non-Generation Specific Questions	1	10-28-2006 04:49 PM
Vaccum diagram???	h8z2luze	MKIII Supra	5	08-11-2006 02:47 AM

01-09-2008, 08:29 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Try this link HERE

01-10-2008, 08:38 PM	#4
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	A couple of places worth checking are the connection at the rear of the inlet manifold (the end nearest the bulkhead and the connection to the pressure sensor unit (adjacent to the top of the shock absorber US drivers side) Apologies for pic`s, I had to use a flash light.

01-11-2008, 12:17 AM	#6
SleepysSupra Stock Join Date: Dec 2007 Location: Meriden, Connecticut, USA Posts: 16	Thanks for the pictures they are a big help