Changed multiple parts now car won't turn over

Blackmariah89 · 04-24-2008, 12:46 AM

Today I installed a new coil, new plugs, new wires and new dist. cap. After changing the coil I started it up, and it was fine. So I continued to the wires plugs and cap. Now the car won't turn over. The wires and cap were both labled, so I know they are in the right order. Is there something I'm missing?
89 MK3

mrnickleye · 04-25-2008, 04:37 AM

"turn over" means "will not crank". I think you mean, "won't start".

If it was fine before the cap, etc, then the problem started doing that swap.

Try replacing the old parts back in and see if it starts.

04-24-2008, 12:46 AM	#1
Blackmariah89 Stock Join Date: Apr 2007 Location: Texas Posts: 3	Changed multiple parts now car won't turn over Today I installed a new coil, new plugs, new wires and new dist. cap. After changing the coil I started it up, and it was fine. So I continued to the wires plugs and cap. Now the car won't turn over. The wires and cap were both labled, so I know they are in the right order. Is there something I'm missing? 89 MK3

04-25-2008, 04:37 AM	#2
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	"turn over" means "will not crank". I think you mean, "won't start". If it was fine before the cap, etc, then the problem started doing that swap. Try replacing the old parts back in and see if it starts. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
87 MkIII vs 89MkIII -- parts interchange	willblock	MKIII Supra	5	07-24-2016 06:27 PM