06-29-2009, 12:14 AM | #1 |
Stock
Join Date: Jun 2009
Location: Arizona
Posts: 3
|
Exhaust Head Smoke
I have an 88 turbo supra with 180,000 miles. the head gasket was replaced and the engine was rebuilt 20k miles ago and the car runs just fine..but lately I noticed smoke coming from the exhaust manifold as soon as i turn the engine off..I think it might just be a bad gasket but I'm not sure..any ideas??? thx!
|
06-29-2009, 06:47 PM | #2 |
AEM EMS
Join Date: Jul 2006
Location: UK
Posts: 891
|
Good news! It’s probably the O-ring in the cam-positing sensor needs replacing; check the front of exhaust manifold heat shield for any burnt oil residue.
|
07-13-2009, 09:01 PM | #3 |
Stock
Join Date: Jun 2009
Location: Arizona
Posts: 3
|
I just checked that out and the O-ring on the CPS is not damaged and looks fine..but the plastic cover of the CPS and the plastic gasket within is cracked and completely destroyed...so despite the 0-ring retaining the oil within the sensor could that plastic cover & gasket be the problem?
|
07-14-2009, 03:01 AM | #4 | |
Intake
Join Date: Jul 2009
Location: Canada, Alberta
Posts: 32
|
Quote:
|
|
07-15-2009, 01:20 AM | #5 |
Stock
Join Date: Jun 2009
Location: Arizona
Posts: 3
|
So i replaced the cover and the gasket and when I replaced everything the car would not start..turns out I forgot to mark the position of the CPS..would it be alright to just rea-align the holes from the Dowel pin?
|
07-26-2009, 09:20 PM | #6 |
Stock
Join Date: Jul 2009
Location: New York
Posts: 4
|
Another nice information i think you came from automobile industry am i right????
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
White smoke from exhaust manifold | Rommy | MKIII Supra | 15 | 07-26-2009 06:32 PM |
replacing the head and headgasket | skadaloz | MKIII Supra | 4 | 04-13-2009 11:54 PM |
Fel-Pro Head Gasket for Stock 1990 Turbo Engine | Benesesso | MKIII Supra | 5 | 03-10-2006 10:52 PM |
smoke out the exhaust | wang10 | MKIII Supra | 5 | 04-27-2005 03:19 PM |