Blown Engine

routeinet · 12-26-2005, 10:36 PM

Hi !

I don't know much about a car. Any input would be greatly appreciated.

I've 87 Toyota Supra v6 non-turbo. It seems I've just blown the engine.
I'm thinking of buying a used engine off of Ebay.

Are these used engine worth buying (TOYOTA SUPRA 3.0L ENGINE 7MGE (87-92), used engine on ebay range anywhere between $500 - $800?

Also, what should I expect to pay for the labor cost to replace the engine ?

lifesnotfair · 12-27-2005, 05:18 PM

Just wanted to let you know something - your engine is not V6, it's I6 (inline). And if you've blown it, go with the turbo engine now! =) I dunno labor costs as I don't even live in the USA, but bot the 7M-GE or the 7M-GTE should fit easily in your car, no modifications needs to be done so it's a fast swap and shouldn't be too expensive.

SKILMATIC · 12-27-2005, 08:55 PM

Quote:

Originally Posted by routeinet

Hi !

I don't know much about a car. Any input would be greatly appreciated.

I've 87 Toyota Supra v6 non-turbo. It seems I've just blown the engine.
I'm thinking of buying a used engine off of Ebay.

Are these used engine worth buying (TOYOTA SUPRA 3.0L ENGINE 7MGE (87-92), used engine on ebay range anywhere between $500 - $800?

Also, what should I expect to pay for the labor cost to replace the engine ?

Yes your engine is a 7mg which is a inline 6 cylinder motor 2.8l. Labor cost for extraction and installation of motor you are talking some coin. I would guess something around 5grand.

kwnate · 12-27-2005, 10:27 PM

Quote:

Originally Posted by SKILMATIC

Yes your engine is a 7mg which is a inline 6 cylinder motor 2.8l. Labor cost for extraction and installation of motor you are talking some coin. I would guess something around 5grand.

Guys, lets lead this guy in the right direction. You have a 7m-ge, its a 3.0 liter Naturally Aspirated (non-turbo). Try to find a used JDM motor and have it installed for $1500+ or do it yourself. Make sure it is compression checked and have a leak down test done. Motor will be $350-$800, Install will be 1500+. Going turbo is not as simple as swaping the motor. You also need the correct harness, ecu, intercooler, piping etc... It can be done, but its more expensive.

SKILMATIC · 12-28-2005, 02:26 AM

Quote:

Originally Posted by kwnate

Guys, lets lead this guy in the right direction. You have a 7m-ge, its a 3.0 liter Naturally Aspirated (non-turbo). Try to find a used JDM motor and have it installed for $1500+ or do it yourself. Make sure it is compression checked and have a leak down test done. Motor will be $350-$800, Install will be 1500+. Going turbo is not as simple as swaping the motor. You also need the correct harness, ecu, intercooler, piping etc... It can be done, but its more expensive.

Please tell me where someone can do a motor install for 1500. I would love them to do mine all day. Also i meant to say 3.0l my bad.

*c-town* · 12-28-2005, 04:26 AM

Quote:

Originally Posted by SKILMATIC

Please tell me where someone can do a motor install for 1500. I would love them to do mine all day. Also i meant to say 3.0l my bad.

almost ANY shop will do remeber they want your money!

SKILMATIC · 12-28-2005, 05:03 AM

Quote:

Originally Posted by *c-town*

almost ANY shop will do remeber they want your money!

Not where I live. Where do yu live?

ddmcse · 12-28-2005, 06:40 PM

if the engine is listed as a V6
the owners definition of a blown engine is probably off ..
more like blown head gasket

more research dude

ddmcse · 12-28-2005, 11:25 PM

can u share some more details of this blown engine ?

TRAFIK · 12-29-2005, 12:22 AM

See what is wrong with the engine that you claim is "blown" maybe it will be easer or at least cheaper to fix. If not you can pick up a 7mge for around $500 on ebay. Parts for the car are not that expensive for a import and you can probobly get it put in for under $2000 if you shop around. If you shop around you can have everything done for 2.5 G's but for that amount of money everyone here would go with the turbo version of the engine you have now. 7M-GTE ,there is little or no price difference in the engine itself but you will need some piping ,intercooler and some minor goodies for the turbo swap. I am under the impression that you will be able to fix the existing engine for less money and time.

Give us more information about the cars condition
and have it check out so they can tell you what is really wrong.
Then figure out what you wanna do with the car.If you just want it to run it wont cost you that much to get it running.

This would be a simple swap ,but it still can run you anywhere from $1200-$5000 depending where you go how fast you need it done and what quality work will be put in it.

I live in Chicago and I can have that swap done for about a G if i look around but thats like getting a tatoo done in the back of an ally. Do you really want it done?

12-26-2005, 10:36 PM	#1
routeinet Stock Join Date: Dec 2005 Posts: 2	Blown Engine Hi ! I don't know much about a car. Any input would be greatly appreciated. I've 87 Toyota Supra v6 non-turbo. It seems I've just blown the engine. I'm thinking of buying a used engine off of Ebay. Are these used engine worth buying (TOYOTA SUPRA 3.0L ENGINE 7MGE (87-92), used engine on ebay range anywhere between $500 - $800? Also, what should I expect to pay for the labor cost to replace the engine ?

12-27-2005, 05:18 PM	#2
lifesnotfair 3" Exhaust Join Date: Oct 2005 Posts: 169	Hrm... Just wanted to let you know something - your engine is not V6, it's I6 (inline). And if you've blown it, go with the turbo engine now! =) I dunno labor costs as I don't even live in the USA, but bot the 7M-GE or the 7M-GTE should fit easily in your car, no modifications needs to be done so it's a fast swap and shouldn't be too expensive.

12-28-2005, 06:40 PM	#8
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	if the engine is listed as a V6 the owners definition of a blown engine is probably off .. more like blown head gasket more research dude __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

12-28-2005, 11:25 PM	#9
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	can u share some more details of this blown engine ? __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

12-29-2005, 12:22 AM	#10
TRAFIK 3" Exhaust Join Date: Oct 2005 Posts: 118	See what is wrong with the engine that you claim is "blown" maybe it will be easer or at least cheaper to fix. If not you can pick up a 7mge for around $500 on ebay. Parts for the car are not that expensive for a import and you can probobly get it put in for under $2000 if you shop around. If you shop around you can have everything done for 2.5 G's but for that amount of money everyone here would go with the turbo version of the engine you have now. 7M-GTE ,there is little or no price difference in the engine itself but you will need some piping ,intercooler and some minor goodies for the turbo swap. I am under the impression that you will be able to fix the existing engine for less money and time. Give us more information about the cars condition and have it check out so they can tell you what is really wrong. Then figure out what you wanna do with the car.If you just want it to run it wont cost you that much to get it running. This would be a simple swap ,but it still can run you anywhere from $1200-$5000 depending where you go how fast you need it done and what quality work will be put in it. I live in Chicago and I can have that swap done for about a G if i look around but thats like getting a tatoo done in the back of an ally. Do you really want it done? __________________ --===Give me 2jz-Gte or give me death!===--

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can I make my blown engine Supra back into something that will run for 5 years?	Flanz	MKIII Supra	2	12-19-2007 05:06 PM
HELP! Blown engine! What do I do now?!	asbyo	MKIII Supra	11	07-08-2007 11:32 PM
Blown engine...	Jazzsaxsupra	MKIII Supra	1	11-15-2005 11:39 AM
Bought a MKIII blown engine	zmatt	Non-Generation Specific Questions	12	07-19-2005 05:32 PM