Stand or car...

TxSpeedBoy · 01-10-2006, 05:17 AM

I am trying to decide to either tune up the engine that is currently in my car, or if I should just get that one running strong and buy a new engine and put it ona stand for the tuning. This car is my daily driver. Also, I have found some places online to buy the 7M-GTE motor. But I have heard of an over-seas version that has twin turbos and only connects to a manual transmission which I plan to convert to on a later basis. So which do you all think I should go with...current engine in car...or buy an engine and put it on a stand and build from there?

suprra_girl · 01-10-2006, 10:48 AM

i would say the twin turbo one you're thinking of is the 1jz as that's most commonly referred to....
as always i have a biased opinion.. get another 7mgte that's spun a rod slightly and rebuild it from the ground up

with the 1jz you have quite a bit of wiring to get it to work.... imo... those swaps for me are just too hard lol... alot of ppl are in the process of doing them but i like easy jobs hehe

TxSpeedBoy · 01-10-2006, 05:30 PM

I was thinking it was a 7MG motor, not the 1JZ, I would like to keep with the roots of my supra. Same engine models, no converstions, stuff like that. Where can I find an engine like that?

suprra_girl · 01-11-2006, 12:42 AM

well.. there's an engine importer i believe in the vendor section... you could what they charge for a 7mgte

TxSpeedBoy · 01-12-2006, 03:14 AM

Thanks! Would you happen to know his name?

suprra_girl · 01-12-2006, 11:13 PM

now if you go back to the forum index and look at the bottom under authorised vendors there you will see......... import auto center lol

importauto is the user

i have sent him a message regarding his non activity so hopefully he'll be back and answering posts

Isphius · 01-13-2006, 06:28 PM

where is a good place to buy a rebuild kit for a 7m? i need rings, gaskets, bearings, all that fun stuff. I also need a kit for the n/a trans, so i dont have to pay a sho to do it. I want to rebuild the head too...anyone have any advice on this?

TxSpeedBoy · 01-14-2006, 06:57 AM

For that kinda question I would suggest starting your own thread, gets better results. I went and talked to mechanic about my BHG and he quoted me a price of any where between $2,000.00 and $2,500.00 just to replace the BHG and look at the head for damages. So I am just going to order a rebuilt 7MGTE block and head... it's about the same price and there is alot more done to it. Good luck on your rebuild if you decide to go that route. Don't know of any places to get a rebuild kit though. There is a post on here of all of the companies that provide parts for our cars called... http://kapasigma.com/

If this doesn't work, try going to the general questions area and go to the 2nd page, the post is called "I've put a little thing for you guys" by TRAFIK. Check it out, lots of sites..bound to be in there somewhere.

j3pz · 01-14-2006, 10:13 PM

Quote:

Originally Posted by TxSpeedBoy

I went and talked to mechanic about my BHG and he quoted me a price of any where between $2,000.00 and $2,500.00 just to replace the BHG and look at the head for damages.

you could get a rebuilt head and gasket for under $600. i dont know what labor costs would be but it sounds like he was gonna rip you off.

TxSpeedBoy · 01-15-2006, 02:31 AM

With that info...seems like he may have been. But that was 2 different mechanics from 2 different places. So I dunno. Could be a locality thing. Where can I get that head and gasket? I was going to just go ahead with one of the strongest head gaskets I could find, think it's by HKS...a metal head gasket.

01-10-2006, 05:17 AM	#1
TxSpeedBoy 3" Exhaust Join Date: Dec 2005 Location: Houston, Tx Posts: 83	Stand or car... I am trying to decide to either tune up the engine that is currently in my car, or if I should just get that one running strong and buy a new engine and put it ona stand for the tuning. This car is my daily driver. Also, I have found some places online to buy the 7M-GTE motor. But I have heard of an over-seas version that has twin turbos and only connects to a manual transmission which I plan to convert to on a later basis. So which do you all think I should go with...current engine in car...or buy an engine and put it on a stand and build from there? __________________ Supra Project 06... 1987 Turbo. 18" Enkei RS5. K&N Filter. Magnaflow custom exhaust. "I got a pair of subs for my girlfriend...Good traid huh?!

01-10-2006, 10:48 AM	#2
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	i would say the twin turbo one you're thinking of is the 1jz as that's most commonly referred to.... as always i have a biased opinion.. get another 7mgte that's spun a rod slightly and rebuild it from the ground up with the 1jz you have quite a bit of wiring to get it to work.... imo... those swaps for me are just too hard lol... alot of ppl are in the process of doing them but i like easy jobs hehe __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

01-10-2006, 05:30 PM	#3
TxSpeedBoy 3" Exhaust Join Date: Dec 2005 Location: Houston, Tx Posts: 83	I was thinking it was a 7MG motor, not the 1JZ, I would like to keep with the roots of my supra. Same engine models, no converstions, stuff like that. Where can I find an engine like that? __________________ Supra Project 06... 1987 Turbo. 18" Enkei RS5. K&N Filter. Magnaflow custom exhaust. "I got a pair of subs for my girlfriend...Good traid huh?!

01-11-2006, 12:42 AM	#4
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	well.. there's an engine importer i believe in the vendor section... you could what they charge for a 7mgte __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

01-12-2006, 03:14 AM	#5
TxSpeedBoy 3" Exhaust Join Date: Dec 2005 Location: Houston, Tx Posts: 83	Thanks! Would you happen to know his name? __________________ Supra Project 06... 1987 Turbo. 18" Enkei RS5. K&N Filter. Magnaflow custom exhaust. "I got a pair of subs for my girlfriend...Good traid huh?!

01-12-2006, 11:13 PM	#6
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	now if you go back to the forum index and look at the bottom under authorised vendors there you will see......... import auto center lol importauto is the user i have sent him a message regarding his non activity so hopefully he'll be back and answering posts __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

01-13-2006, 06:28 PM	#7
Isphius 500whp yet? Join Date: Nov 2005 Location: Long branch, NJ Posts: 1,006	where is a good place to buy a rebuild kit for a 7m? i need rings, gaskets, bearings, all that fun stuff. I also need a kit for the n/a trans, so i dont have to pay a sho to do it. I want to rebuild the head too...anyone have any advice on this?

01-14-2006, 06:57 AM	#8
TxSpeedBoy 3" Exhaust Join Date: Dec 2005 Location: Houston, Tx Posts: 83	For that kinda question I would suggest starting your own thread, gets better results. I went and talked to mechanic about my BHG and he quoted me a price of any where between $2,000.00 and $2,500.00 just to replace the BHG and look at the head for damages. So I am just going to order a rebuilt 7MGTE block and head... it's about the same price and there is alot more done to it. Good luck on your rebuild if you decide to go that route. Don't know of any places to get a rebuild kit though. There is a post on here of all of the companies that provide parts for our cars called... http://kapasigma.com/ If this doesn't work, try going to the general questions area and go to the 2nd page, the post is called "I've put a little thing for you guys" by TRAFIK. Check it out, lots of sites..bound to be in there somewhere. __________________ Supra Project 06... 1987 Turbo. 18" Enkei RS5. K&N Filter. Magnaflow custom exhaust. "I got a pair of subs for my girlfriend...Good traid huh?! Last edited by TxSpeedBoy; 01-14-2006 at 07:01 AM.

01-15-2006, 02:31 AM	#10
TxSpeedBoy 3" Exhaust Join Date: Dec 2005 Location: Houston, Tx Posts: 83	With that info...seems like he may have been. But that was 2 different mechanics from 2 different places. So I dunno. Could be a locality thing. Where can I get that head and gasket? I was going to just go ahead with one of the strongest head gaskets I could find, think it's by HKS...a metal head gasket. __________________ Supra Project 06... 1987 Turbo. 18" Enkei RS5. K&N Filter. Magnaflow custom exhaust. "I got a pair of subs for my girlfriend...Good traid huh?!