08-14-2006, 11:02 PM | #1 |
Stock
Join Date: Jul 2006
Location: Vancouver BC
Posts: 14
|
1987 Supra Turbo wiper blade arms
Any one have any leads on where my son could get some replacement wiper blade arms for the above. Whoever at Toyota decided that screwing the wiper blade to the arm was a good idea should be fired. Seems like about 14 seconds after you replace one the screws rust and seize then break off on removal as is the case on the passenger side already.
Thanks
__________________
Vancouver874 Son's car 1987 Toyota Supra Turbo (Targa) No mods yet other than K&N air filter |
08-18-2006, 09:58 PM | #2 |
3" Exhaust
Join Date: Jun 2006
Location: Manitoba
Posts: 150
|
Simple Fix.
I had the same problem, as do most supra owners (I am not going to remove, and oil those screws every month.....PUH!!!). Here is what I did:
1) Take a drill press, or have a steady handed person drill out the old screws, and enlarge the hole SLIGHTLY. 2) Now you simply have to find screws that are long enough for small nuts to be screwed on the other side. and put on the new brackets for the wipers. It took me about 40 mins to do this, and I had to re-drill two holes, they were offcenter, so the screwes didn't fit into the holes on the bracket. With this fix, you can elimiate having to get the broken screws out of the arm, and if the new ones rust, then they can be loosen'd, and just pulled out. Hope that works for you...and don't worry about the asthetics of it, they look no diff than anything else. You are the only one that can see the nuts, so if you care, then well.....TOUGH!!!...lol.
__________________
My Ride: http://www.cardomain.com/ride/2351563 Our Supra’s, which art in the driveway, Hollowed be thy power, thy mods are great, thy speed endless, On the road or at the track. Give us this day free of cops, And forgive us our impound charges, as we forgive those who are slow. And lead us not into speed traps, and deliver us from the interceptors, For thine is our car, the power, and the glory…forever and ever….amen. |
08-18-2006, 11:42 PM | #3 |
Stock
Join Date: Jul 2006
Location: Vancouver BC
Posts: 14
|
Thanks, good idea. Wonder why I didn't think of that (duh!!).
__________________
Vancouver874 Son's car 1987 Toyota Supra Turbo (Targa) No mods yet other than K&N air filter |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HELP PLEASE | Nick0887 | Non-Generation Specific Questions | 4 | 02-28-2009 07:26 AM |
About to be handed down a 1987 Supra Turbo. Need help/Advice on restoration. | j0ker | MKIII Supra | 2 | 08-09-2008 06:42 PM |
Dream Offer | Karma_Supra | MKIV Supra | 22 | 10-17-2007 03:04 PM |
Sequential Turbo Question | suprapoweredsoarer | MKIV Supra | 1 | 06-06-2006 12:13 AM |