![]() |
#1 |
1000whp postwhore
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
![]() |
![]()
ok i am stumped
i have installed single amp, dual subs dual amps, triple subs, triple amps, triple subs triple amp, dual subs, interior speaker combinations b4 now i am trying to install this is the most simplest setup i have ever did a single 12 single amp setup in my mk3 but the fuse keeps blowing out i have a sony xplod 1000 watt 2 channel amp with a 12 inch xplod sub i got an inline fuse (30A) the two fuses in the amp are 30A too everytime i put the fuse in it blows ive tried: taking the power wire from the battery, put the fuse, when i put it the power back in it blows took the ground wire from the battery, put the fuse, when i put it back it blows tried the same thing with the power wire from the amp, same thing happnd tried the same thing with the ground wire from the amp, same thing i have went thru a whole pack of fuses already i am stumped and frustrated any help will be appreciated
__________________
http://www.myspace.com/supra_2nr ![]() Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol |
![]() |
![]() |
![]() |
#2 |
1000whp postwhore
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
![]() |
![]()
Nevrmind the prior question
Last night I had a dream and my subconcious mind talkd to me and told me Your wires are inverted, idiot, Switch the power and the ground dumbass!! And sure enuff I woke up this morning The wires wasn't in the right place in the amp, that's why it kept blowing the fuse But I have another question Everytime I crank the volume up and start get sum bass, the amp shuts off as a safety feature, what could be causing this?
__________________
http://www.myspace.com/supra_2nr ![]() Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol |
![]() |
![]() |
![]() |
#3 |
500whp yet?
Join Date: Nov 2005
Location: Mechanicsville, MD, US of A, 20659
Posts: 1,060
![]() |
![]()
maybe its getting too hot? i dunno my knowledge of amps is limited
__________________
88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat |
![]() |
![]() |
![]() |
#4 |
1000whp postwhore
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
![]() |
![]()
thanx for the info,
but i got it fixed, to anybody getting amps dont get sony xplods, they suck i tried bridging the amp and its jus keeps shutting down on me so now i only can use a single channel and half of the amps power
__________________
http://www.myspace.com/supra_2nr ![]() Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol |
![]() |
![]() |
![]() |
#5 |
12psi boost
Join Date: Apr 2006
Location: Georgia
Posts: 250
![]() |
![]()
oh yeah...you could have asked and someone would have told you not to go for xplod. im a rockford fosgate guy myself but there are many other options besides the xplods. if you wanna look for a different setup check out the audio section of the forum, people have posted all about what the run in their cars.
__________________
My cars: 85 Trans Am- Ehhh- Gone 83 Rx7- Much Better- Gone 86.5 Supra- Love- Not Gone |
![]() |
![]() |
![]() |
#6 |
1000whp postwhore
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
![]() |
![]()
it was a christmas present,
i usually go for diamonds or mtx but what can i do , theyre working right now so yea
__________________
http://www.myspace.com/supra_2nr ![]() Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol |
![]() |
![]() |
![]() |
#7 | |
Lexus & 550's
Join Date: Feb 2006
Location: Canton, OH
Posts: 536
![]() |
![]() Quote:
+1 ........ |
|
![]() |
![]() |
![]() |
#8 |
3" Exhaust
Join Date: Sep 2006
Location: Texas
Posts: 109
![]() |
![]()
i have the same amp and have problems with it somtimes but i got my brothere ot fix the m the one problem i have is that i have 2 infinty 12s on my sony 1000 watt amp and i have ot run both subs o none channel when i try to put one sub on each channel only one of them works the map wont let me run one speaker on each channel i no it not because the channel is blown becaseu can put them both on the other channel and they work
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
87 Supra Wiring Harness | slader99 | MKIII Supra | 9 | 04-28-2008 12:14 AM |
question about wiring harness????? | tone loc | MKIII Supra | 2 | 08-30-2006 09:20 PM |
HKS VPC wiring diagrams | cat007 | MKIII Supra | 0 | 11-07-2005 09:28 AM |