Engine Change

nelly26 · 10-10-2006, 11:49 PM

could any body tell me if it is possible to put a 2JZ-GTE engine into mk 3 supra 92 with all gear box and drive system and wiring and ecu. cheers

tone loc · 10-11-2006, 04:43 AM

defintly not same wiring or ecu. tranny might have to be swapped unless you can find the right bell housing. its kind of a project

dcrusupra · 10-11-2006, 04:59 AM

This question is asked so many times. Search, you will find a bunch of good info. But since I dont like being told to search myself, I will start you out by saying that you will need to do some rewiring on the harness, you'll need to fabricate motor mounts, slightly modify the firewall to accomodate the rear turbo, and if you want to keep the v160 (6 speed trans), you'll have to make the tranny tunnel wider because it is far beefier than the R154 trans.

nelly26 · 10-11-2006, 08:02 AM

ok cheers i will look into the specs on fitting and sizes and i will let you know cheers if it can be done it will be a project and hair ripping out event cool

nelly26 · 10-11-2006, 04:48 PM

cheers guys for help but i will not put in that engine because most components are in different place and also need plenty of cash i have another mk3 with knackerd gear box so i will rebuild that engine with a few upgrades and replace all seals and gaskgets and it will be more fun i will do some work myself and get the rest done professional but if you have suggestion on what mods i could upgrade engine with i would appriciated but i must mention i am in uk and it is rhd i am also maybe selling a mk3 car without engine with 2 auto gear boxes if u intrested uk only cheers

10-10-2006, 11:49 PM	#1
nelly26 3" Exhaust Join Date: Oct 2006 Location: UNITED KINGDOM Posts: 58	Engine Change could any body tell me if it is possible to put a 2JZ-GTE engine into mk 3 supra 92 with all gear box and drive system and wiring and ecu. cheers

10-11-2006, 04:59 AM	#3
dcrusupra 500whp yet? Join Date: Aug 2005 Location: Plantation, Fl. Posts: 1,052	This question is asked so many times. Search, you will find a bunch of good info. But since I dont like being told to search myself, I will start you out by saying that you will need to do some rewiring on the harness, you'll need to fabricate motor mounts, slightly modify the firewall to accomodate the rear turbo, and if you want to keep the v160 (6 speed trans), you'll have to make the tranny tunnel wider because it is far beefier than the R154 trans. __________________ New Rebuild My CarDomain

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
change oil pump without pulling engine	Jjona5	MKIII Supra	2	02-11-2007 03:29 AM
my mkiv supra wont start after engine change HELP!!	gkhawk	MKIV Supra	1	08-18-2006 12:40 PM
Keeping Engine Cool	mrnickleye	Supra FAQ	0	06-04-2005 10:02 PM

10-11-2006, 04:43 AM	#2
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	defintly not same wiring or ecu. tranny might have to be swapped unless you can find the right bell housing. its kind of a project

10-11-2006, 08:02 AM	#4
nelly26 3" Exhaust Join Date: Oct 2006 Location: UNITED KINGDOM Posts: 58	ok cheers i will look into the specs on fitting and sizes and i will let you know cheers if it can be done it will be a project and hair ripping out event cool

10-11-2006, 04:48 PM	#5
nelly26 3" Exhaust Join Date: Oct 2006 Location: UNITED KINGDOM Posts: 58	cheers guys for help but i will not put in that engine because most components are in different place and also need plenty of cash i have another mk3 with knackerd gear box so i will rebuild that engine with a few upgrades and replace all seals and gaskgets and it will be more fun i will do some work myself and get the rest done professional but if you have suggestion on what mods i could upgrade engine with i would appriciated but i must mention i am in uk and it is rhd i am also maybe selling a mk3 car without engine with 2 auto gear boxes if u intrested uk only cheers