|
![]() |
#1 |
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
![]() |
![]()
hehe we should get this sticky'd how to reach 600hp and keep the car on the ground.
i plan on putting this motor in the car and use it for drifting. thats why im trying to reach shuch hi horsepower. i wanna be with the big guys ![]()
__________________
![]() 7MGTE - 500hp ![]() exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR |
![]() |
![]() |
![]() |
#2 |
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
![]() |
![]()
245892 (86-87) Toyota Supra 86-92 A1 Rear Traction Arms - Pair $170.00 $170.00
19282 Toyota Supra 86-92 AEM Tru-Time Adjustable Cam Gears - 7MGTE - Polished (3 Bolt Design) $169.98 $169.98 47787 (87-88) Toyota Supra 86-92 AEM EMS Engine Management Stand Alone - Turbo, M/T Only $1,758.07 $1,758.07 312372 Universal Aeromotive High Flow Fuel Rails $39.00 $39.00 131593 Universal Apexi Power Replacement Air Filters - UNIVERSAL FILTER AND 75MM FLANGE $82.67 $82.67 8021 Toyota Supra 86-92 ARP Head Studs - 7MGTE (includes nuts) $121.08 $121.08 229017 Toyota Supra 86-92 Cooleeze Intercooler Piping Kits - with Spearco IC and HKS BOV $498.75 $498.75 115127 Toyota Supra 86-92 Cusco ALC OS Strut Tower Bars - Front (Special Order) $181.40 $181.40 136952 Toyota Supra 86-92 Endless 4 Piston Slotted Rotors Big Brake Kits - (86.5-92) 1-pc 302x22mm $3,060.00 $3,060.00 56889 Toyota Supra 86-92 Greddy Extreme Timing Belts - (turbo) 7M-GTE $122.43 $122.43 3738 Toyota Supra 86-92 HKS Downpipes - 75mm Pipe Dia. $185.06 $185.06 3620 Toyota Supra 86-92 HKS Super Drager Exhaust Systems - Turbo (85mm, 120mm tip) $602.44 $602.44 6291 Universal HKS Adjustable Fuel Pressure Regulators - 2.0 5.0 kg/cm2, 28 71 PSI $171.60 $171.60 992 Universal HKS In Tank Fuel Pumps - 71gph@45psi $554.40 $554.40 4714 Toyota Supra 86-92 HKS Metal Head Gaskets - Bead (2.0mm thick, 86mm bore) $239.11 $239.11 1123 Universal HKS Racing Type S S Wastegates - 1.6 kg/cm2 (brown) $611.60 $611.60 48869 Toyota Supra 86-92 Hose Techniques Hose Kits - Turbo - Super Red $68.00 $68.00 136492 Toyota Supra 86-92 LIPP MK3 Bolt-on Turbo Kits - Stage 5, TO4E 68 (700hp) with lines and big shaft $1,635.00 $1,635.00 84869 Toyota Supra 86-92 Powerhouse 7MGTE Exhaust Manifolds $699.00 $699.00 110689 Universal RC Engineering Saturated High Resistance Fuel Injectors - 650cc $94.94 $94.94 134261 Toyota Supra 86-92 RK Bushings - Full Kit $650.00 $650.00 9636 Toyota Supra 86-92 Suspension Techniques Sway Bars - Set $264.85 $264.85 100444 Toyota Supra 86-92 Tein Super Street Type SS Coilovers - (Drop 1.8" Front, 1.3" Rear) $950.00 $950.00 46387 Universal Vibrant Universal Catalytic Converters - 3" Inlet/Outlet ID, Oval Body, 16" length $79.74 $79.74 184118 Toyota Supra 86-92 Yonaka Motorsports Complete Engine Gasket Sets - 7MGTE $147.15 $147.15 1% Online Discount (for items not on Clearance) $-131.56 No Sales Tax $0.00 Estimated Shipping & Handling within Continental US $321.38 Total $13,346.09 i think that was about all all parts and numbers are from http://www.horsepowerfreaks.com i chose this because i live in washington and they are in portland so cheap shipping and no sales tax ![]() oh and one last thing, im having troubles finding out how to change the BGH with the motor already out of the car. it gets confusing with the other ones that tell you how to do it while in the car dissconnect this wire and that. i dont have anything on there its just the block, only things missing are the TB,3000,IC&pipes,turbo,and fan.
__________________
![]() 7MGTE - 500hp ![]() exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR Last edited by west_side_supra; 04-06-2007 at 02:09 AM. |
![]() |
![]() |
![]() |
#3 |
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
![]() |
![]()
pics of the motor.
Engine1 engine2 Engine3 polished up some parts. and i dont know how this works but this is where the oil filter would go but the previous owner has put this weird ghetto thingy on there. so if you know how it works tell me ![]() Ghetto oil thingy
__________________
![]() 7MGTE - 500hp ![]() exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR |
![]() |
![]() |
![]() |
#4 |
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
![]() |
![]()
That weird ghetto oil thingy is/was part of an oil filter relocation kit. Lol. Most people do it because the oil filter is a bitch to get to once the engine is in the car.
|
![]() |
![]() |
![]() |
#5 |
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
![]() |
![]()
yea i know, my car has been pickin up the knock sensor and has been runnin rich. so i had a gas smell to my oil. so i had to change the oil and filter and it was a bitch. but how do i work that thing. i mean theres 2 hoses shouldnt there only be one
__________________
![]() 7MGTE - 500hp ![]() exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR |
![]() |
![]() |
![]() |
#6 |
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
![]() |
![]()
I believe its the feed and return hoses. I've never looked into an oil filter relocation kit so I'm not sure what is included in it.
|
![]() |
![]() |
![]() |
#7 |
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
![]() |
![]()
see thats what i figured it was, i just labled it ghetto because it looks like gardening hoses comeing off of it
![]() but about getting that enine down to the head while its out of the bay. what all do i need to take off to do this
__________________
![]() 7MGTE - 500hp ![]() exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Internal motor Question? | Rob420 | Non-Generation Specific Questions | 2 | 11-26-2006 07:23 PM |
Having trouble getting motor separated from tranny... | shawn87gta | MKIII Supra | 15 | 05-08-2006 05:16 AM |