04-03-2007, 04:43 AM | #1 |
Stock
Join Date: Oct 2005
Posts: 16
|
Error Codes 42 and 43
Im recieving these error codes can anyone shed some light on whats causin this?
|
04-03-2007, 05:24 AM | #2 |
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
Code 42 - Vehicle Speed Sensor Signal
Diagnosis - No "SPD" signal to ECU for 8 seconds when engine speed is between 2,500 RPM and 4,500 RPM (7M-GE) or 4,000 RPM (7M-GTE) and coolant temp. is below 80* C (176* F) and neutral start switch is off. Trouble Area - Vehicle speed sensor circuit, vehicle speed sensor, or ECU Code 43 - Starter Signal Diagnosis - No "STA" signal to ECU until engine speed reaches 800 RPM with vehicle not moving. Trouble Area - Ignition switch circuit, ignition switch, or ECU |
04-03-2007, 05:34 AM | #3 |
Stock
Join Date: Oct 2005
Posts: 16
|
Ya i got all that but what do they mean? Im drivin a 91 turbo w/5sp now i dont have speedometor cable hooked up cause needs to be fixed which i figured is 42 but not sure and i have no idea what 43 means by the description.
|
09-14-2008, 09:57 PM | #4 |
3" Exhaust
Join Date: Apr 2007
Location: Waco
Posts: 164
|
Can anybody tell me where the vehicle speed sensor and/or show me a pic of where it is.
__________________
Supra Engine Powered Dragster |
09-14-2008, 10:16 PM | #5 |
walbro fp
Join Date: May 2007
Location: USA - Harford County, Maryland
Posts: 481
|
If its the one I'm thinking of then its on the back of the instrument panel, the TSRM should have something on it in the cruise control section.
Good luck. |
09-14-2008, 10:27 PM | #6 |
3" Exhaust
Join Date: Apr 2007
Location: Waco
Posts: 164
|
I looked but no luck theres not a good picture of where it is. My ecu threw a code 42. and My speedometer quit working. Where does a ecu get a signal of how fast the vehicle is going. I dont have ABS, whats the purpose of this sensor.
__________________
Supra Engine Powered Dragster |
09-14-2008, 10:32 PM | #7 |
walbro fp
Join Date: May 2007
Location: USA - Harford County, Maryland
Posts: 481
|
Well if your speedo cable is broke then it wont spin the speedometer and then it wouldn't send the signal to the speed sensor, I could see how that could fool the ECU in thinking the sensor was bad.
I think the sensor is mainly for the cruise control. It should be labeld on the back of the instument panel. Good luck. |
|
|