07-11-2007, 03:19 AM | #1 |
Stock
Join Date: Jul 2007
Location: tennessee
Posts: 12
|
what size aftermarket rims are everybody running
I was just curious as to see what some common aftermarket rim sizes people have on their mkIII supras. Im looking for a set but there are just way too many to make this decision easy. Any feedback would be helpful but the more information you can give me the better (i.e. offsets, rim widths, rim diameters, even pictures if you got them).
|
07-11-2007, 04:31 AM | #2 |
1000whp postwhore
Join Date: Apr 2007
Location: Escape from the Prison Planet
Posts: 1,356
|
I'm running the stock 16 inch 5 point mags.
I have heard of guys going up to 18's. The larger the rim the more top end you'll gain. But you will also be a bit more slow out of the hole. Just some food for thought. Stick with stock. They are good rims. Just stay away from the sawblades. |
07-11-2007, 04:43 AM | #3 |
3" Exhaust
Join Date: Jul 2006
Location: Santa Rosa, CA
Posts: 70
|
I run 17x9 on the rear with a 40mm offset. Fronts I run 17x8 with 40mm offset. Rears have 275/40r17 and fronts 245/45R17. No rubbing whats so ever.
|
07-12-2007, 04:04 PM | #4 |
Stock
Join Date: Apr 2005
Posts: 20
|
volk gt-n's
18x8 fronts +38 18x9 rears +42 looks allright . i wanna get 15mm spacers then i recon they would sit perfectly |
07-13-2007, 02:46 PM | #5 |
1000whp postwhore
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
|
i got sum black konigs, which i got from a trade lol
17x7 40mm offset 235/40/17 front 245/45/17 rear
__________________
http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol |
07-13-2007, 02:48 PM | #6 |
12psi boost
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
|
im running on the 18" ADR M-sports. hehe i got them with tires for 300$
__________________
7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR |
07-13-2007, 03:29 PM | #7 | |
1000whp postwhore
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
|
Quote:
__________________
http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol |
|
07-14-2007, 04:21 PM | #8 |
3" Exhaust
Join Date: Sep 2006
Location: Texas
Posts: 109
|
wont the bigger wheels trow off your speedo or can u just get a lower proflile tire the bigger the wheels is the smaller the porfile on the tire ot make the speedo be right
__________________
Supras anrt ricers there Japanese Muscle 1988 supra n/a just finsihed 5 speed swap goal is 400hp with a turbo motor swap |
07-14-2007, 05:01 PM | #9 |
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
I went from 15" wheels to 17" wheels on my hyundai and it's only off by like 1 or 2 MPH.
I've test fitted the rims I'm getting and they are 18x8.5 +35mm offset in the front and 18x9.5 +35mm offset in the rear and it fit damn near perfect if not perfect. |
07-14-2007, 06:52 PM | #10 |
3" Exhaust
Join Date: Jun 2007
Location: OH
Posts: 67
|
I got 18x9 Front and 18x10 Rear with 275/35/18
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
the weight of rims? | rinso | Non-Generation Specific Questions | 3 | 03-28-2007 10:38 AM |
Rims and Tyres | Ice | Non-Generation Specific Questions | 1 | 08-07-2006 03:58 PM |
Paint Job And Rims | Sever_13_ | Exterior , Interior, and Detailing | 6 | 07-19-2006 02:25 AM |
Question about RIMS! | lifesnotfair | Off Topic Forum | 2 | 12-09-2005 03:33 PM |