|
|
|
|
#1 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
![]() |
There really is no cheap way to get to 600. So you will be spending the money. Theres no doubt about that. Once again, I stress, this is an old car. Take care of it before doing mods. Sure, people have done the 2JZ swap. There is going to be lots of fabrication needed. You'll need to bang the firewall in to get the rear turbo to fit, you'll need to cut a piece of the frame where the stick shift comes up thru into the cab, you'll need to redo the wiring harness, make new motor mounts, and many more.
This is a 2JZ in an MKIII with a single turbo swap ![]() |
|
|
|
|
|
#2 |
|
Intake
Join Date: Jun 2006
Location: lee, ME
Posts: 44
![]() |
Ok Now we are making head way. ok now here is the low down on my idea. pull the 7MGE and auto get ahold a 2jzgte and a 5 speed, conver to single trubo and put 10,000 in the motor and tranny that should get me near 600 hp then another 5 to 10,000 in the suspention and body basicly there is a 32 hudson with a 8-71 blower on a 502 an well i want to beet him so now that you see the plan what do you think.
|
|
|
|
![]() |
|
|