clutch pedal to the floor

[suprabahamut]

no I bought the car from a friend and I have had it for about 2 weeks and when I got it the pedal was just stuck to the floor. I was under it today and I dont see any leaks. but the clutch resivor is full of fluid if it is the master cylinder is there a way to fix it or dyonosis it to be the seal and if it is the seal do you need to replace the whole master cylinder

[mrnickleye]

OH....

If it were mine.....

I would attempt to bleed it out first.

If that failed to repair it, I would try to SEE into the pressure plate, throw out bearing area to determine if the arm and such all looked normal.

If so, then I would likely replace the master cyl. with a reman unit from Carquest. Cost between $65-$130.

Rebuild kits are $22-$42. If you KNOW how.

Slaves cost $18-$64. Kits $10-$18

[suprabahamut]

I tried to bleed it but the clutch pedal doest have any presure in the pedal to push nothing out is there another way to bleed it the pedal just drops and locks to the floor, but I did find one more thing the master cylinder was leaking but there is still a lot of fluid in the resivor is this posible for the master cylinder to leak but still a lot in the resivor. and should I replace the master cylinder and the slave cylinder together

[dcrusupra]

Thats what the clutch pedal does. You have to lift it from the floor manually. It takes a while for it to actually come back. And yes it is a good idea to replace both the clutch master and slave cylinders.

[j3pz]

i had to manually do it for a couple of minutes to feel any pressure. i actually only felt the pressure when i was going so fast i felt i was jacking the pedal off. i actually bought a master cylinder, then i tried to rebleed and fixed the problem, so now i have a new one that isnt needed... yet...